Interpump W 131
Code: EML-10W00131
Product detailed description
Interpump W 131 belongs to the Interpump 47 series range. Catalogue reference: 10W00131.
Technical specifications
| Manifold | brass |
|---|---|
| PTO | male shaft Ø 24 mm |
| Centering | 61/87 |
| RPM | 1000 |
| FLOW RATE (L/MIN) | 15 |
| MAX PRESSURE (BAR) | 130 |
| MAX POWER (KW) | 4,04 |
| Catalogue reference | 10W00131 |
Download technical / product sheet (PDF) ↗
Installation and model selection
Match the complete reference, drive speed, shaft, mounting and connections to your installation. Where two operating speeds are listed, use the corresponding flow and power values. The photograph illustrates this pump series; the supplied execution follows the selected reference.
View all Interpump 47 series models → · Technical selection support →
Additional parameters
| Category: | Interpump 47 series |
|---|---|
| Flow rate: | Over 10 to 15 L/min |
| Pressure Max: | Up to 150 bar |
| Manifold: | brass |
| PTO: | male shaft Ø 24 mm |
| Centering: | 61/87 |
| RPM: | 1000 |
| FLOW RATE (L/MIN): | 15 |
| MAX PRESSURE (BAR): | 130 |
| MAX POWER (KW): | 4,04 |
| Catalogue reference: | 10W00131 |
| Flow rate — exact values: | 15 L/min |
| Maximum pressure — exact values: | 130 bar |
Interpump: Italian high-pressure pump engineering
Interpump is an Italian name in professional high-pressure piston and plunger pumps. Its development of compact pumps with ceramic pistons helped shape modern pressure washing equipment. Today, the brand serves equipment manufacturers, service companies and operators of industrial cleaning installations.
Technology and applications
Interpump pumps are used to deliver pressurised water in professional washing and industrial systems. The wider Interpump Group also operates in water jetting and hydraulics, while the pump brand is particularly relevant to pressure washers, vehicle washing and industrial cleaning.
- High-pressure plunger pumps for professional cleaning equipment.
- Pumping solutions for car wash installations and industrial washing.
- Application-specific pump configurations and service components.
Selecting a pump or replacement parts
Check rated flow, pressure, rotational speed, inlet temperature and drive arrangement against the intended duty. Similar-looking pumps can have different shafts, mounting dimensions and seal specifications. The complete model code and parts diagram are therefore essential when ordering service kits or replacing an existing unit.
Visit our Interpump high-pressure pumps category to compare the available models and their technical specifications.