ELECTRIC MOTOR TYPE B3/B14 - 3 PHASE NICOLINI
Code: 1645/MEC
Product detailed description
Nicolini B3/B14 three-phase electric motor
This motor combines mounting feet with a small threaded flange and a keyed output shaft. It is intended for pump drives using a suitable coupling and pump adaptor.
Select the power rating and frame size for the pump. Check shaft diameter, flange dimensions, coupling alignment, voltage and operating speed before installation.
Available dimensions and ratings
| Shaft Diameter | Frame | Power Kw | Voltage V |
| 19 | B3/B14-mec80 | 0,75 | 230/400 |
| 28 | B3/B14-mec112 | 4 | 230/400 |
| 28 | B3/B14-mec112 | 5,5 | 230/400 |
Additional parameters
| Category: | MOTORS |
|---|---|
| Supply voltage: | 230/400 |
| Frequency: | 50Hz |
| RPM: | 1450 /min |
| Type: | B3/B14 – Motor with output shaft and threaded flange |
Nicolini: electric motors for industrial equipment
Nicolini develops electric motors for machine builders and industrial applications. The company focuses on integrating the motor with the requirements of the driven equipment, including pump installations and purpose-built machinery.
Product range and applications
Its range includes asynchronous electric motors and solutions with integrated electronics. Different configurations address the mechanical interface, electrical supply and operating requirements of the machine. In a pump assembly, the motor must provide sufficient power at the speed required by the pump.
Selection and system integration
Check rated power, rotational speed, voltage, phase and frequency, then compare the frame size, mounting form and shaft dimensions. Also verify the duty and environmental protection required by the installation. A motor with the right kilowatt rating may still be unsuitable if its speed or mechanical interface differs.
Browse our electric motors for pump assemblies and machinery.