ST-007 LANCE 1000/400
Code: 2313/BLU 2313/RED 2313/YEL 2313/GRE Choose variant
Product detailed description
ST-007 wash lance: 1000 mm length and 400 mm insulation
ST-007 high-pressure wash lance for cleaning and disinfection in the food industry, with a total length of 1000 mm and 400 mm of insulation. Available in various cover colours, nozzle angles and flow rates.
Selecting the lance and nozzle
The stainless steel tube is listed for a maximum pressure of 250 bar. Match the nozzle angle and flow option to the surface, cleaning distance and output of your equipment. The lance does not determine the complete system flow by itself; gun, hose and nozzle selection also matter.
Both inlet and outlet are G 1/4-inch male connections. Check that the gun and nozzle holder accept these connections before assembly. The second number in the product name describes the insulated section, not an additional lance length.
Technical data
| Max pressure (bar) | 250 |
|---|---|
| Tube | Stainless steel |
| Length (mm) | 1000 |
| Inlet | G 1/4" M |
| Outlet | G 1/4" M |
Before ordering
Blue, green, red and yellow options support identification within your cleaning routine. Select the required colour and confirm the nozzle configuration before ordering. Chemical suitability depends on the complete assembly and the product being applied.
Additional parameters
| Category: | GUNS, LANCES & BRUSHES |
|---|---|
| Max pressure (bar): | 250 |
| Tube: | Stainless steel |
| Lenght (MM): | 1000 |
| Inlet: | G 1/4" M |
| Outlet: | G 1/4" M |
R+M Suttner: accessories for professional cleaning
R+M Suttner provides components and accessories for professional cleaning equipment. The portfolio covers high-pressure washing, vehicle cleaning and foam application, with products that connect the machine to the operator and the surface being cleaned. It is relevant to equipment assembly, maintenance and the adaptation of existing installations.
Product range and applications
The range includes spray guns, lances, nozzles, hoses, couplings and accessories for foam cleaning. Different product families address general pressure washing as well as specialised cleaning and hygiene tasks. Selecting coordinated components helps establish the required spray behaviour, reach and handling characteristics.
Selection and system integration
Check the pressure, flow and temperature limits of every part in the circuit, including hose assemblies and connectors. Material compatibility matters when detergents or disinfectants are used. Connection standards, nozzle sizing and the ergonomics of the gun and lance should be considered together for the intended working conditions.
Explore guns, lances and brushes or hoses and hose reels.