A80 R – SELF-PROPELLED ROTATING CLEANING HEAD
Code: 2298/21
Product detailed description
PA A80R is a water-driven rotating cleaning head for the internal cleaning of closed tanks. The incoming water drives a turbine and planetary gearbox, producing combined rotary motion for 360° spray coverage without an external motor.
The head is rated for up to 160 bar and a maximum flow of 120 L/min. The required flow depends on the injector and nozzle configuration; select these components to match the pump output and cleaning application. The base head body corresponds to supplier part number 1125482000.
The stainless steel head has a G3/4 female inlet, a minimum overall diameter of 165 mm and a rated rotation speed of 10–16 rpm. It uses four nozzles with 1/4-inch male NPT threads. The supplier specifies applications in tanks up to 6 m in diameter; actual cleaning performance depends on pressure, flow, nozzle selection and deposits.
Additional parameters
| Category: | Cleaning heads |
|---|---|
| Max pressure (bar): | 160 |
| Max flow rate (l/min): | Up to 120; depends on injector configuration |
| Body: | Stainless steel |
| Nozzles type: | 4 x 1/4" M NPT |
| Minimum overall (mm): | 165 |
| Rated rotation speed (rpm): | 10–16 |
| Inlet: | G 3/4" F |
| Number of nozzles: | 4 |
PA: valves and accessories for high-pressure cleaning
PA is an Italian manufacturer of components for pressure washers, vehicle washing and industrial cleaning equipment. Its portfolio covers pressure control, liquid delivery and operator accessories, helping equipment builders and service teams configure the complete cleaning circuit around the pump.
Product range and applications
PA products include unloader valves, spray guns, lances and other accessories used in high-pressure washing systems. The wider range also covers components for chemical application and specialised cleaning tasks. Applications extend from mobile pressure washers and car washes to cleaning installations in industrial environments.
Selection and system integration
Select each component according to the actual working pressure, water flow, temperature and connection type. An unloader valve must be compatible with the pump and circuit layout, while the gun, lance and nozzle need to work together at the intended operating point. Chemical compatibility and replacement-part identification are also essential for service work.
Browse our unloader valves and guns, lances and brushes.